高压倍压老化测试电源 高压倍压老化测试电源
..............................................................................................................................................................................................................................................
产品价格属性 仅供参考 具体价格请来电或者旺旺咨询
主要特点
宽输出电压、电流范围：0-16 vdc to 0-4000 vdc和0-40 adc to 0-24000 adc
以标准的宽输入电压、频率范围:
从380 vac到480 vac频率：50 hz和60 hz
高精度的可编程和监测
i/o标准通讯接口：37针电路标准的光隔离的用户i / o界面，无需额外的隔离电路
高效率的运作：高达92％的效率在满载情况下
rs232接口标配（标准scpi命令）：gpib，usb，以太网，rs485接口可选
可选以太网lan接口（lxi-certifiedethernetcommunications）:内嵌web-server
过压过流保护关闭标准(oct&ovt std):过压保护和过流保护机械接触器高速断开主输入
可回馈电网选件（内置models 250 kw+):
电能可回馈电网功能选件（powercycleac grid），自动谐波消除平衡系统，产生(6n±1)-12/18/24/48个脉冲的回馈电网技术
ivi驱动程序：多种可视化编程应用可支持labview,labwindows/cvi,ivi驱动等
前面板计量校准：界面简洁、显示清晰
specifications
input | |
nominal voltage3 phase, 3 wire + ground | 380 vac (operating range 342 - 418 vac)415 vac (operating range 373 - 456 vac)440 vac (operating range 396 - 484 vac)480 vac (operating range 432 - 528 vac) |
frequency | 50 hz (operating range 45 hz - 55 hz)60 hz (operating range 54 hz - 66 hz) |
power factor | > 92% at max. power 100 kw and 150 kw modules> 96% at maximum power 250 kw modules |
environmental | |
operating temperature | 0°c to 50°c |
storage temperature | -25°c to +85°c |
air cooling | front and rear intake, top exhaust |
physical | |||
power | input phases | size (h" x w" x d") | weight |
100 kw150 kw250 kw500 kw750 kw1000 kw | 3φ3φ3φ3φ3φ3φ | 62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)62.5 x 48 x 31.5 in (158.8 x 121.9 x 80.0 cm)62.5 x 72 x 31.5 in (158.8 x 182.9 x 80.0 cm)62.5 x 144 x 31.5 in (158.8 x 365.8 x 80.0 cm)62.5 x 216 x 31.5 in (158.8 x 548.7 x 80.0 cm)62.5 x 288 x 31.5 in (158.8 x 731.6 x 80.0 cm) | 1600 lbs (725.8 kg)2100 lbs (952.5 kg)3300 lbs (1496.9 kg)6600 lbs (2993.7 kg)9900 lbs (4490.6 kg)13200 lbs (5987.4 kg) |
output | |
ripple | see model charts |
line regulation | voltage mode: ± 0.004% of full scalecurrent mode: ± 0.02% of full scale |
load regulation | voltage mode: ± 0.01% of full scalecurrent mode: ± 0.04% of full scale |
load transient response | 2 ms to recover within ±1% of regulated output with a 50% to or to 50% step load change |
efficiency | ≥ 90%; see model charts |
stability | ± 0.10% for 8 hrs. after 30 min. warmup |
isolation | user inputs and outputs:referenced to earth groundmaximum input voltage to ground:±2500 vacmaximum output voltage to ground:±1000 vdc for models less than or equal to 1000 vdc,±4000 vdc for models greater than 1000 vdc. |
maximum slew rate | standard models:100 ms for an output voltage change from 0 to 63%,100 ms for an output current change from 0 to 63%.withhigh slew rate option (+hs):6 ms for an output voltage change from 0 to 63%,12 ms for an output current change from 0 to 63%. |
bandwidth | standard models:3 hz with remote analog voltage programming,2 hz with remote analog current programming.withhigh slew rate option (+hs):60 hz with remote analog voltage programming,45 hz with remote analog current programming. |
programming levels and accuracy of full scale | ||||
voltageset point | currentset point | ovtset point | octset point | |
remote analog programming accuracy | ± 0.075% | ± 0.075% | ± 0.075% | ± 0.075% |
digital programming accuracy | ± 0.075% | ± 0.075% | ± 0.075% | ± 0.075% |
remote analog programming levels | 0 - 10.0 vdc | 0 - 10.0 vdc | 0 - 10.0 vdc | 0 - 10.0 vdc |
monitoring levels and accuracy of full scale | ||
output voltage | output current | |
remote analog monitoring accuracy | ± 0.2% | ± 0.2% |
digital monitoring accuracy | ± 0.2% | ± 0.2% |
remote analog monitoring levels | 0 - 10.0 v | 0 - 10.0 v |
control limits | |
remote sense limits | 3% maximum voltage drop from output terminals to load. remote sense is not available for models with output voltages greater than 1000 vdc. |
period programming limits | minimum period: 10 msecmaximum period: 9997 sec or 2.77 hours |
digital control inputs and outputs limits | input voltage: 0 to 5 vdc, 10k input impedance;output voltage: 0 to 5 vdc, 5 ma drive capacity5 v supply: 25 ma. |
本公司是一家从事高科技电力电子领域仪器仪表企业，是经国家相关部门批准注册的企业。主营电源系统、传感器、手持便携测试仪器、电阻电容电感、自动化系统、节能滤波系统、节能回馈电子负载、电源传感器、通用台式测试仪器、电阻电容电感测试自动化系统、变压器、电抗器、电机介质损耗测试仪，匝数比测试仪，高压源，标准电容，静电校准系统，计量校准标准源以及测试夹具配件等。公司位于中国上海上海市奉贤区海思路999号。上海逸威电子设备有限公司本着“客户第一，诚信至上”的原则，与多家企业建立了长期的合作关系。热诚欢迎各界朋友前来参观、考察、洽谈业务。
联系人：陈芸雁
手 机：
电 话：021-61732122
传 真：021-61732122
邮 编：200233
地 址：中国上海市嘉定区城北路338号鼎固大厦717-718室
主 页：http://shop97.cn.1688.com
1.我公司产品种类良多，以上价格属性仅供参考，详情可旺旺或来电咨询我们！
2.以上报价无关运费，若您有其他需要或要求，可来电咨询我们！
3.为了我们更好的合作，请在拍下前联系我们哦！
我们本着生产精益求精、经销诚实守信、服务热情周到的服务宗旨和协助伙伴成就事业从而成就自己的事业的立业精神，为客戶提供卓越的品质和服务。真诚地与广大新老客户携手共创未来! 欢迎客户来图、来样、来料、来版加工、批发，承接国内外订单,一律欢迎!!!想了解更多产品和价格，请与我公司联系或登陆我公司网站。 签收时请务必当着快递人员的面，打开包裹检查商品有没有损坏，核对数量是否正确，如果发现有问题一律拒签，或是有问题一定当快递员面联系我们，签字后，快递员离开后，发生的问题，买家承担，为了有一个愉快的交易，请一定执行！谢谢！一旦签收则视为对商品已认可。
欢迎各界朋友莅临本公司业务部参观、指导和业务洽谈。
与各位达成长期合作，以我们公司诚信与贵公司共创双赢。
本产品的加工定制是是，品牌是美国MagnaPowerElectronics，型号是MT系列VI，输入电压是380~480（V），输出电流是0-40~0-24000（A），输出电压是0-16~0-4000（V），保护功能是过压过流保护关闭标准(OCT&OVTSTD)
